Flexi-Edge Combo Squeegees Series

MOQ and Shipping Quantities by Product

• Item # 1011 | Part # BW-3 | 500 PC MOQ | Orders above MOQ: 500 PC per box

• Item # 1012 | Part # BW-4 | 500 PC MOQ | Orders above MOQ: 500 PC per box

• Item # 1013 | Part # BW-6 | 500 PC MOQ | Orders above MOQ: 500 PC per box

• Item # 1017 | Part # BW-12 | 500 PC MOQ | Orders above MOQ: 250 PC per box

This squeegee is well-suited for a range of pressure-sensitive materials and applications including:

Window tint and solar control films

• Vinyl graphics and lettering

• Paint protection film (PPF)

• Sign-making and decals

• Automotive wraps

• Static cling films

• General adhesive and tape work

There are 3 key differences:

1. Material Flexibility

• Rigid squeegee – constructed from a single material.

• Flexi-Edge combo – Has one rigid plastic edgeand one softer, flexible rubber edge to match curves and bends.

2. Versatility in Use

• Rigid squeegee – Primarily used for heavy-duty pressure tasks like applying thick vinyl graphics or pushing out large air pockets.

• Flexi-Edge combo – Works on a wider range of materials. Soft edge: Protects delicate films like window tint, paint protection film (PPF), and static cling while the Hard edge handles tougher jobs like applying adhesive vinyl or laminates.

3. Surface Safety

• Rigid squeegee – Can scratch or mar delicate surfaces if used without a felt edge or buffer.

• Flexi-Edge combo – The rubber edge glides more gently, reducing the risk of scratches, creases and stretch marks in thin film.

Yes — the Lidco Flexi-Edge Combo Squeegee is well-suited for wet installs, and in fact, it was originally designed with that in mind for window tint and film applications.

1. Flexible Rubber Edge Pushes Out Water

• The soft, pliable edge conforms to the surface and creates a continuous seal, which helps sweep out trapped water and application fluid without leaving streaks.

• This is especially helpful with delicate films where you don’t want to scratch the surface during the final passes.

2. Dual-Edge Design Handles Both Stages of Wet Install

• Rigid edge – Good for the initial positioning stage to press larger sections of film and move bulk water.

• Soft edge – Ideal for finishing passes to remove fine moisture without damaging or lifting the film.

3. Reduced Scratch Risk on Soft Films

• During wet installs, films are more vulnerable to scratching because lubricants thin out as you work.

• The rubber edge of the Flexi-Edge is more forgiving than a fully rigid plastic squeegee, helping protect sensitive coatings.